Monday, May 30, 2011

RV Roof Leaks and Holes Repairing

Once you have found the source of the leak, you’ll need to patch it up as soon as possible to prevent any more damage. For holes that are bigger than one inch in diameter, it is usually best to use a piece of aluminium sheeting to cover it with. To do this, you need to cut out a piece of the sheeting that is larger than the hole in the roof. Make sure you have plenty of bearing so that you can cover the hole completely. Secure the aluminium sheet to the roof, over the hole, with self taping screws that can be driven straight into the roof. Then, to seal the sheet so it’s watertight, use a putty tape around the edges or some kind of non-hardening putty, making sure there are no gaps left at the edges of the sheet at all.

Smaller sized holes can be fixed more easily, using a sticky aluminium tape, for example Peel N Seal repairing tape. Simply clear all debris away from the hole, clean the surface where you are going to stick the tape, and finally seal the hole, making sure the tape is stuck down very firmly and there are no gaps visible.

If you do not carry out regular maintenance on your mobile home roof, you are running a huge risk. If left too late, then repairing the roof of your mobile home or RV trailer can cost upwards of several thousand dollars and all because you failed to spot a small roof leak in time.

Preventative maintenance can save you an awful lot of money in the long run, it’s easy to perform, and very inexpensive. You don’t even need to have any real skills to do it. Mobile homes need care and attention just as much as our real homes do. If you love your mobile home and take care of it, then your mobile home will take good care of you.

No comments: