Wednesday, June 17, 2009

Elastomeric Roof Coatings

EnergyGuard™ Elastomeric Roof Coating is a high solids, acrylic elastomeric coating for all types of roofs.

Built Up Roofing (BUR), Concrete Roofs, Masonry, Metal Roofs, Modified Bitumen, Polyurethane Foam, Single Ply Roofing and Wood.

• Provides a seamless, durable membrane.
• Superior adhesion to various substrates.
• Contains fungicides and mildewcides.
• Excellent UV protection for polyurethane foam.
• Heat reflective coating helps reduce cooling costs.
• Reflects the sun's UV-rays and prevents premature degradation.
• Prevents premature roof failure by controlling thermal cycling.
• Easy to use, non-toxic and VOC compliant water based coating.

• All surfaces to be coated must be clean, dry and free of any oil, grease or dirt.
• Any existing coating must be checked for good adhesion.
• Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
• Energy Guard & trade; Elastomeric Roof Coating is ready to use. Thinning is not recommended.
• Containers should not be left open for extended periods of time.
• Follow our roof restoration procedures and always perform a coating adhesion test before doing the entire roof.
• Spray: Airless Sprayer, 1gpm, 3,000 psi, .027 or .031 tip.
• Brush: Good quality synthetic bristle brush.
• Roller: Short nap roller.
• Clean Up: Water

EnergyGuard™ Elastomeric Roof Coating is available directly from EPDM Coatings like liquid rubber and liquid EPDM. Pricing information can be obtained from an EPDM Coatings Representatives.

On pre-approved, qualified applications, using approved applicators, a 10 year warranty is available. Contact us for complete warranty information.

Periodic maintenance of Energy Guard Roof Restoration System ensures extended service life and maintains reflectivity.

No comments: