-->
EnergyGuard™ Elastomeric Roof Coating is a high solids, acrylic elastomeric coating for all types of roofs.
BASIC USES:
Built Up Roofing (BUR), Concrete Roofs, Masonry, Metal Roofs, Modified Bitumen, Polyurethane Foam, Single Ply Roofing and Wood.
ADVANTAGES
- Provides a seamless, durable membrane.
- Superior adhesion to various substrates.
- Contains fungicides and mildewcides.
- Excellent UV protection for polyurethane foam.
- Heat reflective coating helps reduce cooling costs.
- Reflects the sun's UV-rays and prevents premature degradation.
- Prevents premature roof failure by controlling thermal cycling.
- Easy to use, non-toxic and VOC compliant water based coating.
INSTALLATION
- All surfaces to be coated must be clean, dry and free of any oil, grease or dirt.
- Any existing coating must be checked for good adhesion.
- Before application, any loosely adhered coating must be removed and bare surfaces must be prepared, cleaned and checked for compatibility.
- Energy Guard & trade; Elastomeric Roof Coating is ready to use. Thinning is not recommended.
- Containers should not be left open for extended periods of time.
- Follow our roof restoration procedures and always perform a coating adhesion test before doing the entire roof.
- Spray: Airless Sprayer, 1gpm, 3,000 psi, .027 or .031 tip.
- Brush: Good quality synthetic bristle brush.
- Roller: Short nap roller.
- Clean Up: Water
AVAILABILITY AND COST
EnergyGuard™ Elastomeric Roof Coating is available directly from EPDM Coatings like liquid rubber and liquid epdm. Pricing information can be obtained from an EPDM Coatings Representatives.
WARRANTY
On pre-approved, qualified applications, using approved applicators, a 10 year warranty is available. Contact us for complete warranty information.
MAINTENANCE
Periodic maintenance of Energy Guard Roof Restoration System ensures extended service life and maintains reflectivity.
EnergyGuard™ Elastomeric Roof Coating Technical Data
Property
|
Value
|
Test Method
|
Color:
|
White or any custom color
| |
Viscosity:
|
6,000 - 8,000cps
| |
Solids by weight:
|
68% ± 2%
| |
Solids by volume:
|
60% ± 2%
| |
Density:
|
11.2 ± .2 lbs per gallon
| |
Hardness:
|
45 Shore A
|
ASTM D-2240
|
Tensile Strength:
|
400 ± 50 psi
|
ASTM D-412
|
Permeability:
|
3.5 perms
|
ASTM E-96
|
Elongation:
|
315%
|
ASTM D-412
|
Flash Point:
|
None
| |
Shelf Life:
|
12 months @ 40°-90°F
| |
Clean Up:
|
Water
|
No comments:
Post a Comment